Apex API range of heavy duty pumps, conforming to API 610 11th edition standard. Designed for the most onerous duties handling hydro carbons and chemicals at high temperatures and pressures.
Pumps are of modular construction and are available in a wide variety of materials including steel, stainless steel, duplex stainless steel and titanium.
Features
– Designed and engineered to the customer requirements
– Single stage impeller
– Double volute casing on most sizes
– Back pull out design
– Centreline mount
– Cartridge mechanical seal to API 682
– All metal flexible spacer coupling to API 671
– Heavy duty cast steel bearing housing
– Oil lubricated bearings with constant level oiler
– Bearings protected by AES Labtecta labyrinth seal
– High efficiency IE3 Motors
Benefits
– Reliability through strict quality procedures, good engineering practice and quality materials as standard
– Rotating element may be removed from the pump without disturbing the pipework
– Low Nett Positive Suction Head protects the pump from cavitation damage
– Non-overloading power characteristics
Operating range
– Maximum flow rates up to 900 m3/hr
– Discharge flange sizes 40mm – 200mm
– Max generated head 160 m at 2900 rpm
– Flange ratings BS4504 PN16, BS4504 PN25, BS4504 PN40, ANSI 150RF or 300RF
Applications
– Chemical, refinery and process
– Hydrocarbon duties
– High temperature chemical service
– Offshore process applications
Working pressure
Standard pumps are capable of a working
pressure of 40 bar subject to flange rating
All pumps are hydrostatically tested upon
assembly to 1.5 times the rated working pressure.
Materials
Castings in a variety of materials are produced in
the company’s own ISO 9001 foundry in Bristol,
using the Replicast® method to produce porosity
free castings by shell moulding. Castings can
meet NORSOK and NACE MR0103 standards
where required.
– Cast steel ASTM A216 Grade WCB
– Stainless Steel ASTM A351 CF8M, CF3M, CF8, CF3
– Duplex stainless steel ASTM A890 Grade 1B
– Super Duplex stainless steel ASTM A890 Grade 5A
– Titanium ASTM B367 Grade 2
– Hastalloy C ASTM A494 Grade CW-12MW
– Other grades available on request.
Sumber : https://www.apexpumps.com/pumps/api-pump/
No comments:
Post a Comment